ECSM with solid electrolyte consists of two housings – outer and inner. The device can be used on any type of soil, including aggressive soils. Reference electrodes are installed above the structure to be inspected. Installation is performed into the soil and below its freezing level.

The unit housing is made of durable material capable of withstanding moderate loads and damage. The measuring electrode is located in the lower part. The package includes a cable at least 5 meters long. ECSM-T2 can be ordered with a longer cable if required.

For convenient connection, the ECS housing has a terminal board. Each cable has an information label, which significantly simplifies connection, maintenance, and operation of the device. The price of ECSM-T2 double-membrane with solid electrolyte depends on additional components.

Product Specifications

The ECSM-T2 electrode group has the following characteristics:

• Resistance – does not exceed 10 kOhm;
• Potential – from 100 to 130 mV;
• Service life – minimum 30 years;
• Weight – 4.2 kg without cables;
• Cable length – minimum 2 meters.

Delivery of ECSM-T2 and order details are coordinated with each customer. The product complies with GOST standards and can be used at minimum temperatures down to -5°C and maximum temperatures up to +45°C.

The device can be used at temperatures from -5°C to +45°C. This is a stationary long-term type modification. It can be used for measurements in any type of soil. Copper sulfate ECS are installed below the soil freezing level. Installation must be performed above the inspected object.

Before ordering ECSM-T, the appropriate modification must be selected. The ECSM-T unit has a solid electrolyte, allowing its use in any soil type. The model is fully ready for operation and does not require additional adjustments. The product complies with GOST standards. The housing consists of an outer chamber and an inner chamber. The material is durable and capable of withstanding moderate damage and loads.

The ECS is equipped with a board for connecting cables. Each cable has labeling tags, which facilitates connection, operation, and maintenance. The cable length is standard at 5 m but can be changed in agreement with the customer. The final price of ECSM-T depends on additional components.

Product Specifications

The measuring device consists of two housings – outer and inner. The outer housing is made of durable ceramic, resistant to moderate damage and loads. The inner housing is filled with copper sulfate, in which a spiral-shaped electrode made of pure copper is immersed. The space between the housings is filled with a moisture-retaining bentonite-based material.

ECSM-C2-VE copper sulfate stationary double-membrane reference electrodes with auxiliary electrode can be ordered in two modifications. The ECSM-C2-VE model is equipped with an auxiliary electrode located in the lower part of the housing with its own terminal. The measuring device is installed in the ground above the inspected object and placed below the soil freezing level. The cables are connected via terminals to the control measurement point or can be led to a cable mat.

Reference electrodes are supplied with cables of standard length. At the customer’s request, this parameter can be increased. The final price of ECSM-C2-VE depends on the selected model modification and additional components. Each cable of the device is equipped with information labels and terminals, which facilitates connection, operation, and maintenance of the unit.

Technical Specifications

The device can be used at temperatures from -5°C to +45°C.

Before ordering ECSM-C2, its design and operational features must be determined. The unit consists of two housings. Direct contact with the soil is created and maintained by the outer housing, which is made of durable ceramic. Inside it, there is a moisture-retaining bentonite filler. The inner housing is filled with copper sulfate. The measuring electrode is made of pure copper and immersed in the copper sulfate of the inner housing.

Depending on the modification, the ECS housing may include an auxiliary electrode (VE). It is installed in the lower part of the unit housing. Each cable is equipped with terminals for connecting the measuring device to KIP. The connecting cables are labeled with plates containing necessary information, which simplifies connection, operation, and maintenance of the copper sulfate ECS.

Reference electrodes come with cables of a specified length. When ordering, the required parameter can be selected, and ECS with longer cables can be purchased. The price of ECSM-C2 depends on additional components and agreed specifications. The model fully complies with GOST standards and has climatic category 5.

Technical Specifications

ECS of this model can be in two modifications: basic and with an auxiliary electrode. All cables are equipped with terminals for quick and convenient connection. Each cable has an information label, which simplifies operation and maintenance of the unit. The customer can order ECSM-C-VE with cables of any length, but not less than the manufacturer’s specified minimum.

The model consists of two housings, one placed inside the other. The outer housing is made of durable ceramic. This provides sufficiently low resistance during measurement operations. Between the housings is a moisture-retaining filling made of bentonite, which allows the device to be used on various soil types.

Inside the ECS housing, there is a spiral copper electrode immersed in copper sulfate. The VE is connected via a terminal to the side of the housing. Copper sulfate reference electrodes can be used at temperatures from -5°C to +45°C. The product is manufactured in accordance with GOST standards.

ECSM-C-VE Container

The model has a special installation container. Cables and VE are connected to it via terminals. The container itself is equipped with a terminal board. Its purpose in the unit design is to allow free installation and removal of the ECS from the soil. All cable outlets on the container are fully sealed.

To ensure contact with the soil, the lower part of the construction has perforation. The top of the container is fully closed. The price of ECSM-C-VE depends on the container specifications, which cannot be less than 22 cm in length and 16 cm in diameter.

Technical Specifications

The device consists of a sealed vial with a measuring cable. The outer housing is made of durable material, resistant to moderate mechanical damage. Inside is an inner housing filled with copper sulfate. A spiral-shaped electrode made of pure copper is immersed in it. The entire structure is sealed with a heat-shrinkable sleeve. Between the housings is a moisture-retaining mixture.

Before selecting and ordering ECSM-C, it is necessary to review their range. Both portable and stationary units are available. Some models are equipped with an auxiliary electrode. Installation of copper sulfate electrodes is performed above the tested structure. The housing must be placed into the ground below the soil freezing level. The measuring cable is led to the control panel. It can be connected to KIP.

Technical Parameters

The price of ECSM-C depends on the configuration. The cable length can be increased at the customer’s request.

Copper sulfate ECS model ECSM-C is single-membrane. This is the basic modification of the product. Delivery of ECSM-C and components is coordinated with the customer in advance.

The device is designed for underground work. All measurements are performed on structures located below ground level. ECS must be installed above the underground object and placed below the soil freezing level. For measurements in soft soils, the package includes a tip. ECSM-P-VE for hard soils should be ordered with a plug-type tip.

Inside the housing, there is a copper electrode. It is placed in copper sulfate. The measuring element itself is fixed on an aluminum tube. For convenient handling, the tube has a rubberized layer. The electrode cable is led to a terminal. Two types of ECS are available for sale:

• ECS-1.2 – designed for intensive work and equipped with a full-size handle;
• ECS-0.4 – has a shortened handle and is used as a stationary measuring device.

ECSM-P-VE is additionally equipped with an auxiliary electrode (VE). The VE is made of steel in the form of a ring. The additional electrode is located on the side of the unit housing. The price of ECSM-P-VE depends on the selected model and additional components.

Each ECS wire has terminals for connection and labeling plates. This significantly simplifies operation and maintenance of the device. Copper sulfate electrodes can be used at temperatures from -5°C to +45°C.

Technical Specifications

For the models, the cup diameter is 18 mm on the inner edge and 25 mm on the outer edge. The cable length indicated is standard and can be increased in agreement with the customer. Delivery and package contents of ECSM-P-VE are discussed separately.

ECS are used to monitor the condition of pipelines and other metallic structures located below ground level. ECSM-P can be ordered to assess the cathodic protection of pipelines for various purposes. The ECS can be equipped with an auxiliary electrode (VE), and the electrode contact part is made of different materials.

The allowable air temperature for using ECS is minimum 0°C, maximum +50°C. At 100% humidity, the ambient temperature should be approximately +35°C. The design of the ECS depends on the modification and can be supplemented with an installation container.

The price of ECSM-P depends on the selected wire length. This parameter is coordinated with the customer. Installation of portable ECS is performed above the metallic object. For accurate data, the electrode must be placed below the soil freezing level.

Technical Specifications

Delivery of ECSM-P is fully coordinated with the customer. The package includes a user manual. The number of electrodes is determined by the order.

Double-membrane reference electrodes are used for installation in soil. The unit should be positioned above the inspected structure. To perform measurements, the device must be buried to a level below the soil freezing depth. The conductors can be routed to a control measurement point or to a cover. The unit may be operated at ambient temperatures not lower than -5 and not higher than +45 degrees Celsius.

If required, reference electrodes can be ordered with auxiliary electrodes and an installation container. The device housing is made of durable material and filled with bentonite. The filler prevents diffusion between the soil and the electrolyte. Constant contact with the soil is ensured by the presence of capillary channels.

Each unit is supplied with cables. For more convenient operation and subsequent maintenance, each cable is equipped with connection terminals. All cables are marked with information tags. The order price depends on the selected cable length. The product is supplied with a minimum cable length of 3 meters, which can be increased upon request.

Technical characteristics

Delivery and additional product parameters are agreed with the customer. The scope of supply includes:

• operation manual – 1 pc;
• ESMS-M2 – 1 pc;
• installation container (ordered separately) – 1 pc.

Modernized reference electrodes comply with GOST requirements for climatic version and have placement category 5.

The equipment is installed above the structure and embedded into the soil. A mandatory condition is installation of the reference electrode below the soil freezing depth. The conductors are routed to a control measurement point or to a cover. Copper sulfate reference electrodes can be used as portable.

The unit can be ordered in several modifications. Among the available models are devices with an auxiliary electrode (VE). Operation of the reference electrodes is permitted at temperatures from -5 to +45 degrees Celsius. The product complies with GOST standards.

The housing of the modernized reference electrodes is made of durable material, is sealed, and is capable of withstanding moderate damage. Capillary-type channels are provided to ensure contact with the soil. Bentonite filling is located between the outer and inner housings.

The model may have different cable lengths. This parameter is agreed separately with the customer. The final price depends on the selected length of the connecting cables. Each cable is equipped with a terminal for connection and has an information tag. This significantly simplifies operation and maintenance of the device.

Technical characteristics

By agreement with the customer, delivery is carried out with or without an installation container. Each equipment set includes an operation manual. Additional components can be added at the ordering stage.