Instrumentation and Control Post (ICP) Type 9 “Kover”

$0.00

Instrumentation and Control Post (ICP) Type 9 “Kover” is used for switching power and measuring circuits. It is installed at industrial facilities such as compressor stations (CS), booster compressor stations (BCS), underground gas storage facilities (UGS), as well as in urban environments.

Description

You can purchase ICP Type 9 in various configurations, each with its own operational features. Instrumentation and Control Post Type 9 “Kover” is used for installation in systems protecting metal pipelines from corrosion. The equipment can be installed in populated areas.

The post is made in a four-sided shape from materials resistant to combustion and frost. Cable outlets and the cover are fully sealed. At the top there is a terminal panel with clamps, closed with a sealed cover equipped with a lock. Cable outlets are located on the side. Additionally, ICP can be ordered with an agrotechnical coating and a repair kit.

The scope of supply includes everything necessary for installation and operation of the device. Each post is equipped with an additional signal beacon required to locate the device under certain climatic conditions. It is installed in close proximity to the post.

Instrumentation and Control Post Type 9 can be operated in extreme climates, with temperatures ranging from +60 to -60 degrees Celsius. The permissible upper limit of air humidity at +25 degrees Celsius must not exceed 98%.

Product Specifications

Parameter name ICP Type 9
Post height, mm 500-700
Face width, mm 200
Wall thickness, mm 3
Weight, kg, max 15
Enclosure protection rating not less than IP65
Operating temperature range, °C U1, -40 °C … +60 °C 

UHL1, -60 °C … +60 °C

Number of contact terminals on the terminal panel:
— measuring terminals for cables up to 6 mm², pcs. 0, 4, 6, 8, 12, 24
— power terminals for cables up to 35 mm², pcs. 0, 4, 6, 8
Service life, years not less than 10 years

Scope of Supply

Name Unit 

of measure

Quantity
ICP Type 9 post pcs. 1
Cover and lock keys pcs. 2
Marker pcs. 1
Identification tags pcs. according to the number of terminals
Cable tie pcs.
Operation manual copy 1 per batch
Beacon with additional device pcs. 1
* Spare parts repair kit set as ordered
* Agrotechnical coating as ordered

* Supplied upon additional order

Contacts
Adress

Republic of Kazakhstan, Aktau, industrial zone 3, site 2, KM GROUP production base